Impeller Issue: 1.5HP Hayward Self-priming Super Pump (C48L2N134B1)

Jump to latest Follow Reply
DigitalDJ

DigitalDJ

Member
Apr 15, 2024
6
New Jersey
Pool Size
20000
Surface
Vinyl
Chlorine
Liquid Chlorine
Hello everyone,

We live in New Jersey. Pool was closed last winter and working fine at the time. Pool was opened yesterday and when we started the pump the impeller would not spin and the pump would overheat and click off.

- Capacitor was tested and was not the problem.
- Checked the impeller and there was some debris. Cleaned that.
- Impeller would not spin so I forced it by hand to spin both ways.
- Put it all back together and the pump kicked on but is now super loud.
- Also, the impeller and rod now spin with little resistance…

Did I break something and can it be easily fixed?

Thank you in advance!
 

Attachments

  • IMG_5358.jpeg
    IMG_5358.jpeg
    532.5 KB · Views: 11
Last edited:
Welcome to TFP.

Bad bearings that froze over the winter.

What model pump?

How old?
 
You can replace the motor if the rest of the pump is in good condition.

Post pic of the motor data plate.
 
ajw22 said:

Century (A.O. Smith) 1.5 HP Up Rate Motor, Round Flange 56J Frame, Single Speed - Model UST1152 - INYOPools.com

Looking for a replacement pool pump motor that is compatible with your Hayward Super Pump, Hayward Super II, or Jacuzzi Magnum pump? The Century UST1152 1.5 HP motor might be just what you need! This motor is designed to be a direct replacement for your existing motor, making it easy to install...
www.inyopools.com www.inyopools.com
Click to expand...
Much appreciated! Thanks for all of your help.
 
One more question: Is there a way to tell if a bearing is bad once it is removed? Our current pump has a front and a rear bearing. I am just wondering if there's a way to tell which one is bad. Thanks!
 
DigitalDJ said:
One more question: Is there a way to tell if a bearing is bad once it is removed? Our current pump has a front and a rear bearing. I am just wondering if there's a way to tell which one is bad. Thanks!
Click to expand...

Only by disassembling the motor and examining the bearings.
 

Enjoying this content?

Support TFP with a donation.

Give Support
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply