Recent content by woodsage

Hayward replied: "It looks like the update process has stalled. Turn the equipment off and reset the breaker for 2-3 minutes, then try it again. Check to ensure the update file is on the root of the drive." I followed Hayward's advice and the update was processed successfully.

This is the reply I received from Hayward Tech Support: Yes, this is correct information. The updates between 4.4.1 and 4.7.0 are mostly related to control new product features including Fire bowls and flickering effects of the lights. Currently it available for download and installation if...

I noticed there is a firmware update to 4.7.0 on the Hayward support website; I currently am using 4.4.1. I did not receive a Controller or iPhone alert that a firmware update was available; I noticed the firmware update on the Hayward website. When I tried to upgrade the firmware over the...

Hi-please tell me or show a pix of where to route the remote display cable from behind the false front and then exit the cabinet.

Can someone who installed the upgrade kit tell me or show a pix of where to route the remote display cable from behind the false front and then exit the cabinet.

Yep, I'm interested as well; any update when this product will be available to ship?

Jason - Why do the panels need to drain down when not in use? Should I replace my existing 3 way valve for a "leaky" 3 way valve?

Jason - Are flapper type check valves the preferred type to use for supply and return? Is the reason for a "leaky" valve and the draining capability for freezing conditions and off-season? The flow arrow should be down for the return check valve and up for the supply check valve, correct? The...

Is the reason for the two check valves to keep the water in the vertical solar supply/returns line from draining?

Take a look at the pix: Should there be a check valve in the supply line below the 3 way valve and a check valve in the return line above the shutoff valve?

The "groups" perform different functions/settings over a 5 hour period; really there are only 3 "groups". For example, one group does spillover w/o solar, one group does pool only with solar, etc...I'll try your idea of leaving a 3 minute interval of "off" time between groups. Thanx.

When the Hayward automation system (pro-logic) switches from one group to another group, the pump shuts off for 30 seconds and the solar valve closes; 30 seconds later the pool pump turns on and the solar valve valve opens. At that moment the vertical pipes going from the pool pad to the roof...

ColorLogic from Hayward Operating Instructions Cycling Control: 1. Initial Power On-15 seconds of white followed by last program shown. 2. Each on/off cycled at less than 10 seconds will go to the next program. 3. Any off position for between 11 and 14 seconds will reset to program #1. 4. Any...

I've had my EcoStar for about 2.5 years and no problems.