Recent content by manzov22

I raised my chlorine to about 13 before nighttime so I could do the OCLT. Then we got hit with a nasty storm and tons of rain. Will this throw off my test if I test for chlorine? My water level has risen big time.

no i never went to 100%. I will try that after the Overnight chlorine test. I raised the chlorine to 13. SWG is off. I will check it first thing in the morning and hopefully it does not drop a ton. If it does then I guess I need to slam the pool and there might be something in there killing...

goldline aqua rite T cell9

I'm running it 8 to 9 hrs during the day. pump is at 2200 and the SWG is at 80%

How long should I be running my pump? 10,000 gallon pool

I have a hayward SWG and I cannot get the pool to hold chlorine. It has been somewhat hot here but this has never been a issue before. Every few days I have to dump in a half gallon of chlorine. The pools salt cell will not maintain a adequate amount to be self sufficient. I have been told...

yes I can - no problem

So my pool will not turn via the Intermatic timer. I bought new off trippers and those too are bending. I have hand tightened them and tightened them with pliers. Both ways the trippers are bending. the new ones I bought go in perfectly normal and then in the morning pool power is still on...

My guess is that he forgot to install it. Blew the lines out, put antifreeze in thenm and never installed the gizmo. I screwed it in tight so i know there is no way it could just come out. These guys are all in a hurry, that is the problem

So i got a shop vac and sucked out the water in the skimmer and the skimmer line. An antifreeze water mix came out at first. Then i started to see heavy heavy antifreeze coming out. So i stopped the vacuum and dumped more antifreeze in and put the skimmer gizmo back in. Will this process be ok?

So i had a company close my pool. I went out there after a week and the skimmer gizmo plastic thing was floating in the skimmer. It has rained since then and the skimmer is full of water now. I called the well know company and he said just screw the gizmo back in. I said but its full of...

The stairs in my pool were turning yellowish. I added srain feee and it worked great. Now my ph dropped. My ph has been great until i added the stain free. On my taylor k-1000 kit it looks to be in the 6.8 range. How can i raise it? Borax? Baking soda?

Its speratic. I wake up in the morning and its ok. Working good. Then a few hours later its back to LO code. Im very confused

I have Hayward H150FDN Universal H-Series, Low NOx, 150,000 BTU, Natural Gas, Pool and Spa Heater and I am getting a LO code with is a flow problem. I have my intermatic timer set for 755am to turn on and give my equipment power, then at 8am the Hayward pump turn on. Can the heater be on...

I have had my water tested numerous times and it all the numbers are great. The phosphates are low and my water looks great. I had my buddy come over with his TF-100 kit and the numbers were good. Im going to keep monitoring the situation and see if the build up comes back. Ill take any...