Recent content by JcSparky

Gotcha. I did tighten with a wrench so maybe that's my issue. I'll double check the oring and then hand tighten it. I'll also apply some lube which I didn't do.

I recently had to replace the bottom part of my Pentair Cartridge Filter. After reconnecting the existing inflow and outflow PVC to the filter housing, I have a small leak on one of the two connections. Does anyone know if I can use some kind of sealant to shore up that connection and stop the...

I am assuming the CircuPool RJ-16 will be sufficient for my 6600 gallons ?

I'm in! Calling my installer first thing in the morning. Had a SWCG with my last pool but was talked out if it by my pool builder on my current pool.

Finally got my CYA level down to around 55 after drain and fill of around 6000 gallons. Now using liquid chlorine to get my FC level up. Anybody see a reason I shouldn't covert to SWCG now?

Yes it is close, with the exception of the spotting.

None up close where you can see the plaster. I was actually out of town the week of plaster and pool fill. Only have distance pics after the fill.

Water exchange underway to remove excess levels of CYA. We've had several inches of rain this week so I imagine some exchange has already taken place.

They are stored inside at the highest, 73 degrees.

I was wondering when someone was going to ask that question. They are a year old and will replenish soon. I was thinking this could be causing my numbers to be wacky.

My fill water has a pH = 7.5 if that makes a difference. I'll post updated numbers soon.

Thank you. I will attempt a pool water exchange over this week following the previously stated guidelines.

For those asking about possible pool leak, according to attached photos showing a 24 difference, it doesn't appear that I have a leak. Auto fill was turned off during this time as well.