Lake Placid
In The Industry
- May 27, 2021
- 693
- Pool Size
- 17000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
How’s the actual PH reading relative to the sensor reading? If the PH sensor is reading off from actual this would explain a drop test of 4-5 but the panel indicating a lower chlorine reading. Might be wise to log both actual PH reading and FC drop test compared to panel/sensor readings to see which parameter is at the root cause of the shift.The system notifications haven’t come on in several days .
The chlorine says still on low side but doing drop test shows 4-5 on chlorine levels.Have salt output on 3,system updates hourly and has a 24 hr cycle once a notification has occurred.
The sensor indicator at the very top of range,salt cell level shows middle of range and it’s only been in the hot tub for several weeks.
Will continue with updates to keep you all informed.