I have a 16x40 with an 8x8 tanning ledge kit. My hole is being excavated professionally but everything else is on me.
I have plenty of plumbing and electrical experience just not in the line of pool installation.
My questions are this: I have a 1.5/3hp variable speed pump, two skimmers, three returns, no main drain. Is 2” pipe adequate for my needs? When I plumb the skimmers that is the “suction lines” yes? Do they just tee into each other and then one line into the pump? The pump has one inlet one outlet so I assume this is how it must be.
Also are there any suggestions that could help me you may have?
Thanks in advance for any help you can provide.
I have plenty of plumbing and electrical experience just not in the line of pool installation.
My questions are this: I have a 1.5/3hp variable speed pump, two skimmers, three returns, no main drain. Is 2” pipe adequate for my needs? When I plumb the skimmers that is the “suction lines” yes? Do they just tee into each other and then one line into the pump? The pump has one inlet one outlet so I assume this is how it must be.
Also are there any suggestions that could help me you may have?
Thanks in advance for any help you can provide.