So I just filled my pool after building it.... the water is cloudy greenish... not terrible so I started the SLAM process... pH was a bit high 8.0 .. so I was hoping lowering it would also decrease TA and it hasn't touched it... been in the 500's for 3 days .... water has not cleared at all... being that it wasn't that bad I figured I should see some clearing by now.... im guessing the TA is causing the cloudiness??
What's the best way/process to aerate to lower the TA??
Current readings...
FC.. 14
Cya 30
Ph 7.2
TA 560
CC.. 0
What's the best way/process to aerate to lower the TA??
Current readings...
FC.. 14
Cya 30
Ph 7.2
TA 560
CC.. 0