Water Features

This article is currently incomplete. While this article is off to a good start, it still has room for major improvement. Until the article reaches its full potential, it will be hidden from search results.

Pool Water Features

Water features can add a cool water park feel to your pool. Water features can include deck jets, bubblers, waterfalls, laminar jets, and sheer descents. Some water features come with integrated LED lighting. Each major pool equipment manufactures has their versions of water features to add to your pool.

Consider if water features are a "need" or a "want" in your pool. While they look good in pictures and in designs they add cost and complexity to a pool build as well as needing on-going maintenance. Many pool owners find that as time goes on their water features get less and less use.

They discover the downsides of water features include the noise they create and the aeration from the water feature causes pH to rise requiring more frequent dosing of acid to lower the pH.

You have to check the installation manuals for all equipment to find out the flow requirements.

The sheers require about 12 gpm per linear foot assuming a 3 foot elevation above the water and a 15" projection..

Deck jets don't require very much flow.

Bubblers depend on the specifics.

You need to know the flow rate intended for each pipe. For suction, you want to keep the water velocity below 6 ft/sec. For returns, you want to keep the water velocity below 8 ft/sec.

Size.......6 ft/sec......8 ft/sec 2"..............63...............84 gpm 2.5............90.............119 gpm 3.0".........138.............184 gpm

Each sheer should be plumbed separately on its own line and valve so that you can balance the flow equally.