Difference between revisions of "Water Test Reagents" - Further Reading

Line 1: Line 1:
 +
=Water Test Reagents=
 
All water test reagents have a shelf life.  Powders and crystals are very stable if kept dry.  Acids last long.  Storage conditions ae more important then date of manufacturer for reagents<ref>https://www.taylortechnologies.com/en/page/151/reagent-shelf-life</ref>.  Taylor reagents are formulated to last at least one year.
 
All water test reagents have a shelf life.  Powders and crystals are very stable if kept dry.  Acids last long.  Storage conditions ae more important then date of manufacturer for reagents<ref>https://www.taylortechnologies.com/en/page/151/reagent-shelf-life</ref>.  Taylor reagents are formulated to last at least one year.
  
Line 7: Line 8:
 
*Replace caps immediately after use to limit exposure to air and humidity
 
*Replace caps immediately after use to limit exposure to air and humidity
 
*Avoid switching bottle caps
 
*Avoid switching bottle caps
 +
*Keep reagent bottle tightly closed<ref>https://www.taylortechnologies.com/en/page/137/caring-for-your-test-kit-and-reagents</ref>
  
 
==Recognizing Bad Reagents==
 
==Recognizing Bad Reagents==
Line 16: Line 18:
 
*R-0718 Silver Nitrate Indicator - should be colorless; no easy way to tell if bad and recommended to replace annually
 
*R-0718 Silver Nitrate Indicator - should be colorless; no easy way to tell if bad and recommended to replace annually
 
*R-0871/R0872 FAS DPD - Should be colorless; if bad will become increasingly yellow
 
*R-0871/R0872 FAS DPD - Should be colorless; if bad will become increasingly yellow
 +
 +
==Other Test Equipment==
 +
*Wipe all equipment with a clean dry cloth after use
 +
*Make sure color comparator is in good condition with no fading or staining
 +
*Test vials should be clear and not cracked
  
 
.
 
.

Revision as of 21:58, 25 October 2019

Water Test Reagents

All water test reagents have a shelf life. Powders and crystals are very stable if kept dry. Acids last long. Storage conditions ae more important then date of manufacturer for reagents[1]. Taylor reagents are formulated to last at least one year.

Best Reagent Storage Conditions

  • Store reagents at a consistent temperature between 36F-85F (2C-29C)
  • Extreme fluctuations cause reagents to deteriorate
  • Keep reagents out or prolonged direct sunlight
  • Replace caps immediately after use to limit exposure to air and humidity
  • Avoid switching bottle caps
  • Keep reagent bottle tightly closed[2]

Recognizing Bad Reagents

  • R-0002 DPD #2 - should be colorless; as it goes bad it will change to pink then brown[3]
  • R-0003DPD #3 - should be colorless; as it degrades it will become yellow
  • R-0004 pH Indicator - as it degrades it turned from red to yellow or purple
  • R-0008 TA Indicator - should be dark green; begins to stain the milky bottle as it goes bad
  • R-0011L - CH Indicator - should be deep blue color; any otehr color indicates it is bad
  • R-0718 Silver Nitrate Indicator - should be colorless; no easy way to tell if bad and recommended to replace annually
  • R-0871/R0872 FAS DPD - Should be colorless; if bad will become increasingly yellow

Other Test Equipment

  • Wipe all equipment with a clean dry cloth after use
  • Make sure color comparator is in good condition with no fading or staining
  • Test vials should be clear and not cracked

.