We just built our pool and did not have a grotto/waterfall quoted yet. However, the plumbing is there 2-3" tube sticking 18" above the deck. Does anyone have ideas/product/etc for a temporary waterfall that we could attach to this plumbing? Pool is already hot and if the internet is correct, a waterfall might help some (although increase evap). Contractors are too slammed to be bothered with calling for a quote too so desperate times!
Temp/DIY Water Feature Ideas
- Thread starter greggjess
- Start date
- Jul 3, 2013
- 9,027
- Pool Size
- 15000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool SJ-40
sure do 
2 inch plumbing into a home made waterfall.. Just get a 2 inch slip into a 2 inch pipe about 10 inches long, then a 90 towards the pool into a T fitting with 2 inch on each side about 15 inches.. then cap both ends.. I drilled into it at first but it worked better with a sawzall cut down the pipe into the pool..
2 inch plumbing into a home made waterfall.. Just get a 2 inch slip into a 2 inch pipe about 10 inches long, then a 90 towards the pool into a T fitting with 2 inch on each side about 15 inches.. then cap both ends.. I drilled into it at first but it worked better with a sawzall cut down the pipe into the pool..