My pool was off for 5 days while we were out of town. It was light green and cloudy when we returned and got things turned back on. As part of this process, I disassembled and cleaned my filter cartridges.
I’ve been slamming at 10ppm for 3 days now. My oclt has been steadily declining. My cya is low 0-10 range (I presume because I use bleach, but also have an autocover that is on when the pool is not in use). My pump runs 24/7.
After three days, the pool is Crystal clear but the water has a light green tinge. FC has been between 7 and 10 since I started the process. CC has been between 0 and .5. Last night I lost 2 ppm of FC. pH was 7.2 when I started.
Am I on track and just need to stay on the slam routine, or is something wrong? Other than my patience . . .
So for SLAM, I’m looking for:
CC off .5 or less - Check!
OCLT of 1 or less - Getting close
Clear water - Clear but wrong color.
I’ve been slamming at 10ppm for 3 days now. My oclt has been steadily declining. My cya is low 0-10 range (I presume because I use bleach, but also have an autocover that is on when the pool is not in use). My pump runs 24/7.
After three days, the pool is Crystal clear but the water has a light green tinge. FC has been between 7 and 10 since I started the process. CC has been between 0 and .5. Last night I lost 2 ppm of FC. pH was 7.2 when I started.
Am I on track and just need to stay on the slam routine, or is something wrong? Other than my patience . . .
So for SLAM, I’m looking for:
CC off .5 or less - Check!
OCLT of 1 or less - Getting close
Clear water - Clear but wrong color.