- Jul 29, 2009
- 221
- Pool Size
- 25000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
just got the keys to the new place and the pool looks as great as it did when we saw the house previously.
first thing i did was use my trusty tf100 and hopeflly i ran the tests right - here are the results, followed by what i think my next steps are - please tell me if I'm right
FC - .5
TC - .5
TA - 100
CH - 420
CYA - 60
pH - 7.5
next steps, based on pool calculator:
- increase FC by adding 2 tri-chlor tablets (this is what the owners used and what i'll be using until we get settled in and i can change over to BBB)
- TA is OK
- CH is high, we'll decrease it by replacing about 20-30% water
- CYA is high , probably due to the tri-chlor.. we'll decrease it by replacing about 20-30% water
- pH OK
how did i do? thanks in advance.. this forum is great!
first thing i did was use my trusty tf100 and hopeflly i ran the tests right - here are the results, followed by what i think my next steps are - please tell me if I'm right
FC - .5
TC - .5
TA - 100
CH - 420
CYA - 60
pH - 7.5
next steps, based on pool calculator:
- increase FC by adding 2 tri-chlor tablets (this is what the owners used and what i'll be using until we get settled in and i can change over to BBB)
- TA is OK
- CH is high, we'll decrease it by replacing about 20-30% water
- CYA is high , probably due to the tri-chlor.. we'll decrease it by replacing about 20-30% water
- pH OK
how did i do? thanks in advance.. this forum is great!