We've had our pool for a month. When the pool people came to give me a tutorial, I video taped him, didn't want to make any mistakes. I thought it was super helpful. With the salt, he said, don't worry about the timer because your filter is on a timer. He went over the lights, that's it. Every time I took my water to get tested, my pool had zero chlorine, each time given something new to do, my pool still looked good, but every week zero chlorine! It turned a little green, able to correct, but still zero chlorine. Shame on me for not reading the manual sooner, all the trimmers were turned in, so I was never generating chlorine! I thought the auto meant it was OK. I turned the pins out, finally the generating chlorine light is on!! My question, should I slam because my SWG will never be able to catch up. I have the Taylor Test Kit coming tomorrow. Thank you for reading my long message!
I'm an idiot, all my trippers were turned in!!
- Thread starter Ruthie#1971
- Start date
Add 5 ppm of liquid chlorine daily, per pool math, until your test kit arrives.
When the kit arrives, post your test results, and do an overnight chlorine loss test.
When the kit arrives, post your test results, and do an overnight chlorine loss test.
