Conferplastics 7100X? Ladder help, won't stay down!

[Cain]

I have an Above Ground Pool, Splashpools Omega 20ft 9000 gallon pool.

The ladder it came with for some reason I can't keep it down in the water. Its this model I think:


Pool Ladders A-Frame

7100X series

To confirm, am I supposed to fill all of the holes with water, both the pool side and the dry side?

Sorry for the dumb question, still learning ... :uhh:

 

[RonsPlc]

from their site...

[h=1]Model #7100X[/h] Evolution A-frame Ladder

• Economical, yet full-featured
• Fits 48” to 54” pools
• Snap-lock treads for quick, easy assembly
• Swing-up outer section inhibits unauthorized access to pool
• Outer treads can be padlocked (lock included)
• 16” tread width
• No sand or bricks required; just fill with water
  
• Available in warm grey, complementing today’s brown or grey pools
• Convertible to Inpool ladder with otional CK-7100W conversion kit
• Features an anti-entrapment barrier
• Weight guideline: 300 lbs.

I made the part you are looking for Bold, Red letters.

Fill them ALL with water ... the added weight on the outside (Air side) is what will keep it in place.
Filling it on the water side only replaces the air gap and will make it a wash for weight.

 

[Cain]

Thanks!