I upgraded my pump to a 1 up and installed a unicel c-4607 filter for the first day of the new pump install. Only to come back the next day and find that the filter had clogged with fine particulates the previous intex filters left behind, and the subsequent increased suction pressure had collapsed the skimmer basket so much that it popped off the lid. I pushed the basket back out enough after finally getting the lodged filter out so now it can accept new filters. The problem is now the collapsed walls block the filter along most of the media (new inner diameter is not round, more of an inflated triangle.
The ideas I need from this awesome brain trust: anyway to stiffen the walls with some ready made rings or something.... Or a replacement skimmer basket (thicker walled) that still accepts the same cartridges, the only ones I'm seeing don't offer cartridge filtration.
I have a SWG so I don't want to waste the salt doing backwashes.(if I just upgrade to a sand filter) And I want to explore your ideas before purchasing a larger stand alone cartridge system.
Thanks.
The ideas I need from this awesome brain trust: anyway to stiffen the walls with some ready made rings or something.... Or a replacement skimmer basket (thicker walled) that still accepts the same cartridges, the only ones I'm seeing don't offer cartridge filtration.
I have a SWG so I don't want to waste the salt doing backwashes.(if I just upgrade to a sand filter) And I want to explore your ideas before purchasing a larger stand alone cartridge system.
Thanks.