Hi All, been using the TPFC method for a little over a month now and think my pool might be too thersty for chlorine in the evenings when i add...
I typically do the OTO test kit and get around 1 PPM and raise it to 4 ppm by adding 96oz of bleach per pool math. Are their some tricks i am not thinking of that I can use to reduce the chlorine loss?
As of 2:30 this afternoon
FC = 1.5
CC = 0
CH = 150
TA = 120
CYA = 20
PH = 8.2+ almost purple
So yes, the CYA is a little low, going to bring that up to 30... Any tricks or thoughts?
I am running a waterfall from the hottub to the pool, drop is about 4 to 6" not sure if it matters.
I typically do the OTO test kit and get around 1 PPM and raise it to 4 ppm by adding 96oz of bleach per pool math. Are their some tricks i am not thinking of that I can use to reduce the chlorine loss?
As of 2:30 this afternoon
FC = 1.5
CC = 0
CH = 150
TA = 120
CYA = 20
PH = 8.2+ almost purple
So yes, the CYA is a little low, going to bring that up to 30... Any tricks or thoughts?
I am running a waterfall from the hottub to the pool, drop is about 4 to 6" not sure if it matters.