Good morning everyone. I just tested my water for the first time yesterday evenning. First time pool owner.
Here are my #'s
FC 1.5
CC 1
PH 7.3
TA 100
CH 175
HCL 3600
So my questions is this: From Pool School the suggested levels are as follows:
To summarize:
FC 4-6 ppm
PH 7.5-7.8
TA 60-80
CH
CYA 70-80
Salt 200-400 ppm ABOVE recommended optimum level
And Pool Math shows suggested FC leves for SWG at 2.
So why the disparity? Which one do I need to shoot for (2 or 6) or am i miss-reading this?
Here are my #'s
FC 1.5
CC 1
PH 7.3
TA 100
CH 175
HCL 3600
So my questions is this: From Pool School the suggested levels are as follows:
To summarize:
FC 4-6 ppm
PH 7.5-7.8
TA 60-80
CH
- 50-300 for vinyl
- 220-320 for fiberglass
- 250-350 for plaster
CYA 70-80
Salt 200-400 ppm ABOVE recommended optimum level
And Pool Math shows suggested FC leves for SWG at 2.
SWG:2 Normal: 3 to 6 Shock: 12 Mustard Algae Shock: 19 Suggested target FC levels based on the current CYA level for outdoor pools. Note: Be careful if your CYA is really and truly zero! |
So why the disparity? Which one do I need to shoot for (2 or 6) or am i miss-reading this?