Hello,
I'm new to this and already loving this site. I've learned so much in the last few days.
I'm preparing to SLAM my pool; the CYA chart references min FC, target FC, and SHOCK FC. If my CYA is 60, http://www.troublefreepool.com/content/128-chlorine-cya-chart-slam-shock
Does that mean I should put enough bleach (as per the calculator) to bring the FC reading to 24 (shock FC)? Where would I find a test kit that would show me such high reading? The kits I've seen only show readings as high as 5
Or does that mean I should put 24 bags (1lb each) of shock in the pool? (my pool = 10.5K gallons)
If I use the target FC as my guide, for 60 CYA It says the target should be 7. Again, the kits only go up to 5.
are there any recommended FAS-DPD kits that can be recommended without braking the bank?
Thank you very much
I'm new to this and already loving this site. I've learned so much in the last few days.
I'm preparing to SLAM my pool; the CYA chart references min FC, target FC, and SHOCK FC. If my CYA is 60, http://www.troublefreepool.com/content/128-chlorine-cya-chart-slam-shock
Does that mean I should put enough bleach (as per the calculator) to bring the FC reading to 24 (shock FC)? Where would I find a test kit that would show me such high reading? The kits I've seen only show readings as high as 5
Or does that mean I should put 24 bags (1lb each) of shock in the pool? (my pool = 10.5K gallons)
If I use the target FC as my guide, for 60 CYA It says the target should be 7. Again, the kits only go up to 5.
are there any recommended FAS-DPD kits that can be recommended without braking the bank?
Thank you very much