- Aug 9, 2012
- 12
Hello all. Looking to put in a Stenner to help automate chlorination. I am working a lot and want to make sure the pool stays nice and sanitary. Also, sick of pucks and constant CYA issues due to a small pool. So after a bit of research on this site, I've come up with this idea. I just want to run it by someone who has done it before and make sure I haven't missed anything. So I'm looking at Stenner Econ T series with built in timer. For options I am going to pick 8.5 gallons per day. Was a bit unsure about this but assuming I run pump for 6 hours minimum that would be up to 1.25 gallons per day, which should be more than enough. Agreed? Add on the 15 gallon tank which is will be mounted to. I was going to have it flow into the top part of my old in-line puck tube as some others have done. And it will be plugged into a gfci outlet which is already right there. Tell me your thoughts please. Thanks for your time.
I had considered a SWG but to be honest, I'm not the handiest of guys and the maintenance /installationseems like it may be a bit high.
I had considered a SWG but to be honest, I'm not the handiest of guys and the maintenance /installationseems like it may be a bit high.