Here be the results of first use of my TF100. Am I the only one whose "pool stores" have never mentioned CYA concentration being to high? <I really don't need an answer for that> If overstabilization results in increased chlorine demand/use, then my boys over there must be milking a cash cow with their granular shock/tablets recommendations.
Based only on what I have learned here in a few short days, my best guess is that the first thing I need to do is start dumping water, perhaps as much as 50% of the beasts volume, and that I should start using liquid chlorine to sanitize. Last 'shock" with three cups of granular chlorine was three days ago, and the floater always has contained 3" tabs which are used at a rate of a bit more than one per day. Advice on what to-do first would be greatly appreciated.
FC 7
CC 1
TC 8
pH 7.2
T/A 160
CH 450
CYA 100
Assuming that I "waste" 50% of the pool's volume, how much liquid chlorine should I add after refill is complete?
Based only on what I have learned here in a few short days, my best guess is that the first thing I need to do is start dumping water, perhaps as much as 50% of the beasts volume, and that I should start using liquid chlorine to sanitize. Last 'shock" with three cups of granular chlorine was three days ago, and the floater always has contained 3" tabs which are used at a rate of a bit more than one per day. Advice on what to-do first would be greatly appreciated.
FC 7
CC 1
TC 8
pH 7.2
T/A 160
CH 450
CYA 100
Assuming that I "waste" 50% of the pool's volume, how much liquid chlorine should I add after refill is complete?