Good morning. I'm obviously missing something on a new pump schedule I programmed last night.
I intended to set my VS to run at a higher speed for one hour and then ramp down to low speed; instead, it's just running at high speed continuously.
This was my original schedule:
POOL FEATURE - regular pool swim mode 1400 RPM
Monday - Friday 11:00a - 6:00p
Saturday - Sunday 10:00a - 6:00p
And I added this feature & schedule last night:
FEATURE 2 - extra skimming mode 2600 RPM
Monday - Friday 10:00a - 11:00a
Saturday - Sunday 9:00a - 10:00a
It is now Saturday at 10:30a, but the pump is still turning at 2600.
I have verified that the days of week are programmed correctly and that my AMs/PMs are correct. Still, the pump did not "spin down" to 1400.
I've gone through it a dozen times this morning. What am I missing? What can I re-check and verify? Thanks!!
I intended to set my VS to run at a higher speed for one hour and then ramp down to low speed; instead, it's just running at high speed continuously.
This was my original schedule:
POOL FEATURE - regular pool swim mode 1400 RPM
Monday - Friday 11:00a - 6:00p
Saturday - Sunday 10:00a - 6:00p
And I added this feature & schedule last night:
FEATURE 2 - extra skimming mode 2600 RPM
Monday - Friday 10:00a - 11:00a
Saturday - Sunday 9:00a - 10:00a
It is now Saturday at 10:30a, but the pump is still turning at 2600.
I have verified that the days of week are programmed correctly and that my AMs/PMs are correct. Still, the pump did not "spin down" to 1400.
I've gone through it a dozen times this morning. What am I missing? What can I re-check and verify? Thanks!!