Hello, first post here, so thanks in advance for the help!
I installed a 2nd hand Hayward H250 on my pool today. I used 1.5" schedule-40 flex PVC for the line that discharges from the heater and puts water back into the pool.
On the side of my pool there is a combo fitting that doubles as a pool light and allows the water from the pump>filter>heater to be pumped back into the pool. (see pics)
I am showing pics of what I have now, I used glue and tried to thread the gray fitting onto the flex PVC but it is leaking, and not going to hold...
I'm looking for a fitting that will convert from the flex PVC to a female clamp on bib kind of like what is shown in the pics. Sorry if I don't have the correct terminology...
I installed a 2nd hand Hayward H250 on my pool today. I used 1.5" schedule-40 flex PVC for the line that discharges from the heater and puts water back into the pool.
On the side of my pool there is a combo fitting that doubles as a pool light and allows the water from the pump>filter>heater to be pumped back into the pool. (see pics)
I am showing pics of what I have now, I used glue and tried to thread the gray fitting onto the flex PVC but it is leaking, and not going to hold...
I'm looking for a fitting that will convert from the flex PVC to a female clamp on bib kind of like what is shown in the pics. Sorry if I don't have the correct terminology...