I have a Jandy Aquapure ei that has worked perfectly for 3 season. After I connected it this season, I am getting a "low salt/low temperature" reading when it starts up each morning. If I turn it off and then back on, the message goes away. I have checked both the salt level and the water temp and both are fine. I am trying to figure out if a need a new cell or if the cell connections are bad. Does anyone know what each terminal on the cell is for. I have searched the web and the blue wire/terminal seems to be for "flow". I cannot find any info on the others. I called Jandy yesterday but the poor tech that I talked to did not seem to be familiar with this unit and kept mixing it up with another. He told me to call a company to come to my house and check the unit but I can replace the cell or wiring for what that would cost. Just need to figure out where the problem is. Any help would be appreciated.