Well i have a new pool to be installed roughly 6 weeks away. I am ocd about certain things Like safety Esp with electric.
Heres my plans. I have a inground metal wall liner pool to be installed With steps in shallow end and ladder on deep end per code.
ill be bonding atleast 4 spots of the metal wall pool with a continuous 8awg single strand bare copper wire w/ copper lugs. after they approve that backfill and prep for concrete is done for patio pad and chase around pool, run a cont 8awg bare wire 18 to 24 inches around pool connecting it to wire mesh used for concrete reinforcing via copper lugs more than a couple spots and wire tie the mesh together And run jumpers to the cups for ladder and handrail. Since coping is polymer i recon that does not need bonding.
all the 8g copper bonds will be connected and tied into pump,heater,swg.
anything i am missing?
Heres my plans. I have a inground metal wall liner pool to be installed With steps in shallow end and ladder on deep end per code.
ill be bonding atleast 4 spots of the metal wall pool with a continuous 8awg single strand bare copper wire w/ copper lugs. after they approve that backfill and prep for concrete is done for patio pad and chase around pool, run a cont 8awg bare wire 18 to 24 inches around pool connecting it to wire mesh used for concrete reinforcing via copper lugs more than a couple spots and wire tie the mesh together And run jumpers to the cups for ladder and handrail. Since coping is polymer i recon that does not need bonding.
all the 8g copper bonds will be connected and tied into pump,heater,swg.
anything i am missing?