Hi I currently have a stainless steel pentair nautilus ns-48 filter that Has a crack
On the top half the crack is under a 1/2 inch. I had my pump replaced with the pentair vs 3hp pump and found the crack after
Turning on the pump for the first time this evening. I'm going to see if I can get the filter welded before I buy a new filter... If it will not work I was looking at the pentair clean and clear quad de filter . the problem I need help with
Is what model should I get? The filter I have now the pentair nautilus ns-48 says it is 48sq ft the pentair clean and clear shows the 320 model is 320sq ft then there is the 420 model at 420 sq ft.
The clean and clear still uses de but instead of grids it uses 4 cartridges and no backwash valve. Does anybody have experience with the clean and clear filters? Or would you recommend I get a new pentair fNS plus 48 sq ft de filter? My pool is estimated to be around 17,000 gallons according to my city water meter.
Any recommendations would be very much appreciated.
Thank you
On the top half the crack is under a 1/2 inch. I had my pump replaced with the pentair vs 3hp pump and found the crack after
Turning on the pump for the first time this evening. I'm going to see if I can get the filter welded before I buy a new filter... If it will not work I was looking at the pentair clean and clear quad de filter . the problem I need help with
Is what model should I get? The filter I have now the pentair nautilus ns-48 says it is 48sq ft the pentair clean and clear shows the 320 model is 320sq ft then there is the 420 model at 420 sq ft.
The clean and clear still uses de but instead of grids it uses 4 cartridges and no backwash valve. Does anybody have experience with the clean and clear filters? Or would you recommend I get a new pentair fNS plus 48 sq ft de filter? My pool is estimated to be around 17,000 gallons according to my city water meter.
Any recommendations would be very much appreciated.
Thank you