Hello TFP from a Newbie,
Before I start, I apologize if I'm not explaining anything correctly but I hope I can get explain my problem correctly.
I currently have two Intermatic Valve Actuators installed. The one switching the water (coming out of the heater) between the pool and the spa seems to stop working intermittently. I've decided to replace the valve actuator with another Intermatic (so like for like swap out), however I have an issue.
Basically mounting it, and installing seems straight forward, however once its installed and everything plugged in, when I change the toggle switch between position 1 and 2, the valve turns in a manner such that the inlet is blocked temporarily as it moves into the new position. The old valve actuator turns in a manner so the inlet doesn't get blocked. I'm not sure what I need to do to get it to work in the same way.
I thought it might be the cam setting inside, so I opened both the old and the new ones up and the cam setting appears to be the same. Could anyone please help me work out how I can install this correctly?
Thanks in advance for your help.
DJ
Before I start, I apologize if I'm not explaining anything correctly but I hope I can get explain my problem correctly.
I currently have two Intermatic Valve Actuators installed. The one switching the water (coming out of the heater) between the pool and the spa seems to stop working intermittently. I've decided to replace the valve actuator with another Intermatic (so like for like swap out), however I have an issue.
Basically mounting it, and installing seems straight forward, however once its installed and everything plugged in, when I change the toggle switch between position 1 and 2, the valve turns in a manner such that the inlet is blocked temporarily as it moves into the new position. The old valve actuator turns in a manner so the inlet doesn't get blocked. I'm not sure what I need to do to get it to work in the same way.
I thought it might be the cam setting inside, so I opened both the old and the new ones up and the cam setting appears to be the same. Could anyone please help me work out how I can install this correctly?
Thanks in advance for your help.
DJ