- Jul 2, 2014
- 749
- Pool Size
- 19000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
The installers set everything up for me last summer but I did the closing myself. I am very much looking forward to opening (at least 6 to 8 weeks out). In the meantime, I have a couple of questions.
1.) I drained the sand filter but I did not remove the multi-port valve. Do I need to do anything with the sand or valve when I open? Or just re-connect all the hoses and be done? How do I "prime" it?
2.) The pool, as far as I know, is not electrically bonded. Is this something I need to address? The motor is plugged into a dedicated GFCI outlet which is on its own 15 amp breaker.
Thanks in advance!
1.) I drained the sand filter but I did not remove the multi-port valve. Do I need to do anything with the sand or valve when I open? Or just re-connect all the hoses and be done? How do I "prime" it?
2.) The pool, as far as I know, is not electrically bonded. Is this something I need to address? The motor is plugged into a dedicated GFCI outlet which is on its own 15 amp breaker.
Thanks in advance!
Last edited: