Aqua Rite was giving a hi salt light and check t-cell light flashing. I cleaned the T-cell using water and high pressure nozzle. Was unable to to remove calcium deposit so I soaked t-cell in vinegar. That removed scale but after reinstalling t-cell I still get flashing check light and high salt reading.
Tested salt with aqua check strips before and after cleaning and both test actually show a little lower than 3200ppm.
On the t-cell should the plate be metal and look like metal or are they a white ceramic like material. In a picture posted in TFP the picture I've seen show the T-cell plate that look like metal, which is not what mine appear to be.
As I trouble shoot this I will remove the t-cell and take pictures of the plate.
Tested salt with aqua check strips before and after cleaning and both test actually show a little lower than 3200ppm.
On the t-cell should the plate be metal and look like metal or are they a white ceramic like material. In a picture posted in TFP the picture I've seen show the T-cell plate that look like metal, which is not what mine appear to be.
As I trouble shoot this I will remove the t-cell and take pictures of the plate.