I have ordered a Stenner pump to be used with my Pentair Easy Touch 8. I have used one of the open auxiliary positions to hook up a GFCI plug for the Stenner. I plan to program the Stenner to come on at various times during the day to disperse 12.5% chlorine. I chose the 22 gal per day as this is 58.66 oz per 1/2 hour. This way the pump will have a shorter run time say 15 min. several times during the day(I realize the exact time will have to be reached through demand analysis). Does anyone have an opinion on what are the best times to add? Is it best to spread it out over several additions or is there an advantage to one big dump and then letting the ppm ride down throughout the day? I can also set an egg timer in the easy touch and create a button in the features section of screen logic that would allow me to push the button and have a set time for an addition say for extra hot days or heavy bather loads (what would the ppm increase that is a standard for heavy bather load? Is anyone else using the easy touch to control add times for a Stenner pump and what has been your experience?
Thanks a lot,
RKnight
Thanks a lot,
RKnight