Intex Model 633T pump specs?

[Vince-1961]

All I can find out about the Intex 633T is that it's a little less than 1/2 HP, 115 volt, 325 watts and supposedly 2,500 GPH. The manual is woefully deficient in providing useful information.

Does anyone actually know the specs on this pump? What is its maximum feet of head?

 

[Abigail K]

Bump

 

[mas985]

You can measure max head directly if you have a valve between the pump and pool return. Shut off the valve while the pump is running and get the pressure reading. Then multiply the PSI by 2.31 and that is max head. But make sure the plumbing can handle the extra pressure by closing the valve very slowly.

But knowing that is somewhat useless because the pump never runs at that operating point because it is zero flow rate. I think what you are really asking for is the entire head curve but unfortunately, Intex does not publish that.