I was curious if there was a way to unhook the cable coming off the chlorinator to facilitate cleaning? I can disconnect it from the main board, but i have multiple wires "zip tied" together on my pad, so unless I can remove the cable at the chlorinator itself, I would be limited in how far I can move the chlorinator when I remove it for cleaning since the cable is tied to the others on the pad to keep them together. I could always cut out the zip ties, remove the chlorinator cable and then after cleaning use new zip ties to keep the cables together, but I would prefer no to. I have removed the chlorinator and inspected it and it does have some calcium deposits on one end of the cells.