We are having a new pool put in with a raised spa. It is almost complete but a few details need to be finished up including getting the lights (Intellibrite color) going. I notice that there is water dripping (a rather constant and rapid drip) out of the light wire junction box. First I would like to know if this is a safety hazard and secondly if it's common. I did do some reading on it and gather that I likely have a wet niche light housings and suspect that it is ok for water to get into the conduit but am not positive. It sounds like the J-box needs to be mounted at least 8" above the water line. Ours is about 10" above the pool water line but that puts it about 10" below the spa water line. I am guessing that water is going from the spa light niche through the conduit and that the J-box should be 8" above the spa water level. Is this correct or am I off base? Is there something that should stop the water from getting into the conduit? Obviously I don't want water running out of the j-box constantly is moving it up the correct fix. Thanks!