I have all pentair equipment with two valve actuators and a pool and a spa. Currently I have the following functions programmed:
-pool mode: suction comes in from both pool skimmer and pool drain and returns to zero edge spa for spillover (75%) but also return to pool (25%) to get some water movement. Percentages set via valve actuator.
-spa mode: suction from spa and return to spa.
The problem: my 2 HP single speed motor does not provide much water movement to pool when on pool mode. Keep in mind I am returning 75% to spa to get the spillover effect and only 25% to pool via the actuator. Ideally I would like to have 3 functions programmed that look like this:
-pool mode: same as pool mode above but return 100% to spa to get a nice and powerful spillover
-spa mode: same as above
-pool mode 2: same as above but return 100% to pool to get water movement and effective skimming.
Since I know pool mode 2 does not exist can I take advantage of a spillover function?
-pool mode: suction comes in from both pool skimmer and pool drain and returns to zero edge spa for spillover (75%) but also return to pool (25%) to get some water movement. Percentages set via valve actuator.
-spa mode: suction from spa and return to spa.
The problem: my 2 HP single speed motor does not provide much water movement to pool when on pool mode. Keep in mind I am returning 75% to spa to get the spillover effect and only 25% to pool via the actuator. Ideally I would like to have 3 functions programmed that look like this:
-pool mode: same as pool mode above but return 100% to spa to get a nice and powerful spillover
-spa mode: same as above
-pool mode 2: same as above but return 100% to pool to get water movement and effective skimming.
Since I know pool mode 2 does not exist can I take advantage of a spillover function?