With just replacing my liner I've learned my lesson and will be using the TFP method this time. Used Pristine Blue for 5 years and pool was out of control before liner was accidentally punctured two years ago while closing. Pool was just filled with drinking water late last night so the testing has begun. I know that I bought the wrong test kit and will be buying the FAS/DPD test kit add on for the kit I bought tomorrow. Water is currently a cool 74 degrees.
TC - 0
FC - 0
PH - 7.0
TA - 50ppm
CH - 0
CYA - 0
I just want to make sure that I'm adding the correct amounts and weather I should add everything at once or just do a little at a time. The pool calculator has me doing the following.
128oz of 8.25% bleach - which I did put in tonight because I did not want to be without chlorine.
67oz of borax
120oz of baking soda
91oz of stabilizer
Am I on the right course of action?
Thanks for all your help!
Stan
TC - 0
FC - 0
PH - 7.0
TA - 50ppm
CH - 0
CYA - 0
I just want to make sure that I'm adding the correct amounts and weather I should add everything at once or just do a little at a time. The pool calculator has me doing the following.
128oz of 8.25% bleach - which I did put in tonight because I did not want to be without chlorine.
67oz of borax
120oz of baking soda
91oz of stabilizer
Am I on the right course of action?
Thanks for all your help!
Stan