I have a 18x48 inch intex pool. We have had water in it for 2 days. We had a big rain and now we have two legs that are sinking into the ground. We didn't do anything special to prep the ground because at the time it was basically level. The high filter is no longer in the water all the way. It is about halfway in (as that is now on the high side). I know it is above the 2 inches that they recommend is the max. My roommate and I had some difficulty putting it up. She didn't have her glasses in when we prepped for the pool so that caused a lot of headache. We had to rent a pump and everything to get that part fixed. I think that is part of the problem...we
Moved the pool around too much trying to fetch out all the **** that could puncture it. Now it is up and two legs are sinking. She says if we drain the pool we are getting rid of it because she can't afford to fill it up again. This pool had been quite the problem. So is there any way to fix this without draining just for the summer? We are pretty inexperienced with tools and such so if there is a way...please be VERY detailed. I had read some posts on using a jack or something else with pavers but I don't understand what they did exactly....thanks!
Moved the pool around too much trying to fetch out all the **** that could puncture it. Now it is up and two legs are sinking. She says if we drain the pool we are getting rid of it because she can't afford to fill it up again. This pool had been quite the problem. So is there any way to fix this without draining just for the summer? We are pretty inexperienced with tools and such so if there is a way...please be VERY detailed. I had read some posts on using a jack or something else with pavers but I don't understand what they did exactly....thanks!