Viynylworks 24" safety fence install

[Havlc2u]

So have started the vinyl fence install on a 20' by 52" intex pool. First thing they say to use a 5/32 drill bit. That is a bit small. I started to use a 3/16 bit. Have to mount the brackets like this.

reason for this is so there is a little more support than being above the T's. I will update some more later but this is the start.



So further into the installation noticed the screws are cheap. Have be very careful to not strip the holes.

Sent from my SM-G900P using Tapatalk

 

[b15nut]

Looking good! Keep the pics coming.

Sent from my LG-D801 using Tapatalk

 

[Havlc2u]

Here is the first section on the pool

I have a gap between the fence and the deck rail not sure yet how I will cover it yet.


Section 2

This will take all day.

From the inside

Sent from my SM-G900P using Tapatalk

 

[laceygirl]

Wow, that's coming along nicely.... I really like that...

 

[Havlc2u]

Here is how far i got today.

Sent from my SM-G900P using Tapatalk

 

[Havlc2u]

Here is the completed safety fence.

Sent from my SM-G900P using Tapatalk

 

[DarrelB]

Very, very nice! This is the way to go for sure. How about a link to where to purchase? I see your in Fargo, you buy local?

 

[Havlc2u]

I actually ordered if off of amazon. Have to order the number of sections to match the number of poles I ordered 16 sections because 4 sections on my pool are against the deck. It works really well. Fencing

 

[DarrelB]

Nice, thanks for the link!