I'm installing the aqua-rite this weekend and want to be sure I put it in the right place. (I can't figure out how to paste jpgs, so here is a link to my google album).
http://picasaweb.google.com/eoz3106/Pool
As you can see I have an in-line feeder that I've never used. (A previous owner installed it.) To the right of that is something I'm not familiar with, it says "Purex Pool Equipment" and "Ortega". I can't find anything via Google on it.
So here are my questions:
1. There is a place coming out of the heater before the valve were the aqua-rite will fit, but is that proper and the best place?
2. If so, should I remove the in-live feeder at the same time?
3. What's the Purex do?
Of course any other feedback would be greatly appreciated!
http://picasaweb.google.com/eoz3106/Pool
As you can see I have an in-line feeder that I've never used. (A previous owner installed it.) To the right of that is something I'm not familiar with, it says "Purex Pool Equipment" and "Ortega". I can't find anything via Google on it.
So here are my questions:
1. There is a place coming out of the heater before the valve were the aqua-rite will fit, but is that proper and the best place?
2. If so, should I remove the in-live feeder at the same time?
3. What's the Purex do?
Of course any other feedback would be greatly appreciated!