- Apr 26, 2014
- 8
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 700
We just put in an in-ground 17500 salt water quartz plaster pool/spa combination. It was more or less turned over to us about 3-4 weeks ago. When it was turned over the spa walls, benches and floor were rough like sand paper. Come to find out the pool walls and floor are too. I was able to scrub a good bit off of the walls in the pool, but there is more to go. Last week i noticed that my mx6 pool cleaner had a bunch of small salt like crystals attach to it. I am guessing that this is calcium sticking to everything. I also have a bit of inconsistent color in my gray plaster. It is not very uniform. Is this typical with colored plaster? I will try to take some pics tomorrow for some visuals.
My builder said that he could come by and dump a bunch of acid in the pool to help get rid of the scale and non-uniform/blotchy areas in the pool plaster. Does this seem right.
My water test today came back as follows:
Alkalinity 125
Ph 8.2
Calcium 325
Stabilizer 68
Chlorine 2.4
Salt 2400
Any help would be greatly appreciated.
My builder said that he could come by and dump a bunch of acid in the pool to help get rid of the scale and non-uniform/blotchy areas in the pool plaster. Does this seem right.
My water test today came back as follows:
Alkalinity 125
Ph 8.2
Calcium 325
Stabilizer 68
Chlorine 2.4
Salt 2400
Any help would be greatly appreciated.