Hello,
For the past month or so, without any rhyme or reason, the actuators on the pool and spa suction/returns change to spa position while in pool mode. Usually, it seems, this is when the pool starts up its daily cycle in the morning. Also, at some point during the day, they switch to the correct position. Additionally, the spa heater will come on without being programmed to do so, although this is more infrequent than the other issue. I have manually switched off the heater as I don't want to waste energy or have it come on when no one is home, asleep, etc. I have checked the programming and there don't appear to be any "layers" that are interfering with proper functioning. Is my controller on the fritz? Any other ideas? I don't think the actuators are broken if that helps trouble shooting.
Thank you for your ideas and suggestions, I'm really stumped!
One further question: On the controller, the heater button lights change from red to green--what is the difference?
Hi there! I see no one is responding, so maybe you're stumped, too? If there is anyone who has some thoughts or ideas as to what's going on I'd really appreciate it. I'd like to understand the problem.
For the past month or so, without any rhyme or reason, the actuators on the pool and spa suction/returns change to spa position while in pool mode. Usually, it seems, this is when the pool starts up its daily cycle in the morning. Also, at some point during the day, they switch to the correct position. Additionally, the spa heater will come on without being programmed to do so, although this is more infrequent than the other issue. I have manually switched off the heater as I don't want to waste energy or have it come on when no one is home, asleep, etc. I have checked the programming and there don't appear to be any "layers" that are interfering with proper functioning. Is my controller on the fritz? Any other ideas? I don't think the actuators are broken if that helps trouble shooting.
Thank you for your ideas and suggestions, I'm really stumped!
One further question: On the controller, the heater button lights change from red to green--what is the difference?
Hi there! I see no one is responding, so maybe you're stumped, too? If there is anyone who has some thoughts or ideas as to what's going on I'd really appreciate it. I'd like to understand the problem.