OK now for my weakest knowledge in pool maintenance...plumbing and equipment. We have a booster pump for our Pentair Legend Platinum vac, and it works great (plenty of power, etc.). This is our third season with the pool, and last year I noticed that water would come out of the booster pump fitting into the pool (the hole where we attach the robot to the wall), as if the pump were still running, even when the pump was off. It started out slow, but this year it is more noticeable, as if we have a 3rd return.
I guess a valve or something is going bad? The booster pump is hooked into our plumbing at the end of the system (after the heat pump, SWG, etc.)...it was put in by our PB so I'm sure it's according to Pentair's instructions, but this can't be good that water is 'pumping' out of the fitting, even when the pump is off? I'm sure it did not do this when it was first installed.
I guess a valve or something is going bad? The booster pump is hooked into our plumbing at the end of the system (after the heat pump, SWG, etc.)...it was put in by our PB so I'm sure it's according to Pentair's instructions, but this can't be good that water is 'pumping' out of the fitting, even when the pump is off? I'm sure it did not do this when it was first installed.