How do you control the speed you want the pump to run when the timer switches to "ON" as per your clock setting ??? The pump starts on at 3,000 rpm and will continue this RPM until the timer switches to off. I would like to lower the RPM's after several hours of pump run time. I mean I can do this manually, but I would like it to switch to a lower RPM automatically.
1.5hp max-Flo VS pump question
- Thread starter Donny
- Start date
OK I just downloaded the manual. The manual is pretty good with instructions on how to program the pump.
- May 3, 2007
- 16,904
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
You might want to read the manual: http://www.hayward-pool.com/pdf/manuals/MaxFloVS.pdf
V2 can be selected manually and it will run at that speed for the programmed time and then switch to V1.
V2 can be selected manually and it will run at that speed for the programmed time and then switch to V1.
