Hi,
At the moment we are manual feeding the chlorine until we can buy SWG. This is first time I use proper kit to do the testing, as I am really sick of getting wired test result from pool shop and buying those unnecessary chemicals... The test kit I use is TAYLOR 2006C. Below is the test result:
Test 1
14/03/2014 6:17pm
-CH 250
-CYA 100
-FC 0.5
-CC 0.8
-PH: more than 8
In between 2 tests, I slam the pool (don't know if I did it properly!) and lower my ph to 7.2
Test 2
22/03/2014 2:27pm
-PH 7.6
-TA 170
-CH 300
-CYA 65-70
4:50pm
-FC 1
-CC 0.2
Do i need to slam my pool again, or I should just add liquid chlorine to bring up my FC level? And add acid to lower my TA, then aerate to increase the PH?
At the moment we are manual feeding the chlorine until we can buy SWG. This is first time I use proper kit to do the testing, as I am really sick of getting wired test result from pool shop and buying those unnecessary chemicals... The test kit I use is TAYLOR 2006C. Below is the test result:
Test 1
14/03/2014 6:17pm
-CH 250
-CYA 100
-FC 0.5
-CC 0.8
-PH: more than 8
In between 2 tests, I slam the pool (don't know if I did it properly!) and lower my ph to 7.2
Test 2
22/03/2014 2:27pm
-PH 7.6
-TA 170
-CH 300
-CYA 65-70
4:50pm
-FC 1
-CC 0.2
Do i need to slam my pool again, or I should just add liquid chlorine to bring up my FC level? And add acid to lower my TA, then aerate to increase the PH?