Haven't used my spa in about 6 months, turned the spa on, filter works and heater works but when I press Aux 1 and 2 buttons for spillover and booster , I just get a "click" sound...does not work. The pump associated to that does not come on, no hum, nothing - and the pump is less than a year old. I cannot find any reset on this pump (Hayward 1 hp). Turned off breakers and back on...still nothing. Any help is appreciated.
Pro Logic board won't turn on Aux 1 or Aux 2 (Spill over and Booster)
- Thread starter FL_Donna
- Start date
The click is likely the relay closing, so sounds like a problem after the relay. I would start trying to trace the power and confirm the pump is getting power and not working.