So we're finally starting the process of building a pool (again...)... Got the HOA approval and are now waiting on city to issue permits... if all goes well, we should start digging within 2 weeks or so...
Specs:
Area: 804sf
Perimeter: 120f
Depth: 3.5' - 6.5'
Volume: Guestimating it to be about 25-27K gallons...
Plaster: Color (haven't decided on the actual color yet but leaning towards gray-blue mix)
Coping: Flagstone
Bond beam: 12" faced w/ flagstone
Deck: Color Stamped concrete
Water features: 3 24" sheer descents on bond beam
SPA: 10'x7' 8-jet @ water level (will probably do infinity edge-like finish so that the spa wall is almost level w/ water surface)
Waterline tile
Skimmer: 2 on separate piping
Lights: 2 pool, 1 spa (not doing LED)
SWG: Jandy AP-1400
Filter: Jandy 580sf
Pumps: Jandy 1.5 HP for sheers, Jandy 1 HP 2-speed for filter / circulation, Pentair 3HP intelliflow for spa jets
Heater: Jandy 400LXI cupronickel
Automation: Jandy 6614AP-L power center w/ RS8 P&S & iAqualink
Plumbing: 2.5" suction w/ 2" return for pool, 3" suction w/ 2.5" return for spa jets
auto fill
Here's a pretty basic plot plan for what we want (not completely accurate -- decking goes all the way to property line on left, not showing all lights/skimmers)
[attachment=0:18ld7wi2]plot plan.png[/attachment:18ld7wi2]
We get a lot of wind from left to right during certain times of the year, so we're definitely going to need a skimmer in the right corner, would love some suggestions on placement of the other skimmer...
The first light, is going where it's shown, now we need find a place for the second light.
Would love to hear feedback, suggestions, criticisms (not too many of those, unless really warranted )
Specs:
Area: 804sf
Perimeter: 120f
Depth: 3.5' - 6.5'
Volume: Guestimating it to be about 25-27K gallons...
Plaster: Color (haven't decided on the actual color yet but leaning towards gray-blue mix)
Coping: Flagstone
Bond beam: 12" faced w/ flagstone
Deck: Color Stamped concrete
Water features: 3 24" sheer descents on bond beam
SPA: 10'x7' 8-jet @ water level (will probably do infinity edge-like finish so that the spa wall is almost level w/ water surface)
Waterline tile
Skimmer: 2 on separate piping
Lights: 2 pool, 1 spa (not doing LED)
SWG: Jandy AP-1400
Filter: Jandy 580sf
Pumps: Jandy 1.5 HP for sheers, Jandy 1 HP 2-speed for filter / circulation, Pentair 3HP intelliflow for spa jets
Heater: Jandy 400LXI cupronickel
Automation: Jandy 6614AP-L power center w/ RS8 P&S & iAqualink
Plumbing: 2.5" suction w/ 2" return for pool, 3" suction w/ 2.5" return for spa jets
auto fill
Here's a pretty basic plot plan for what we want (not completely accurate -- decking goes all the way to property line on left, not showing all lights/skimmers)
[attachment=0:18ld7wi2]plot plan.png[/attachment:18ld7wi2]
We get a lot of wind from left to right during certain times of the year, so we're definitely going to need a skimmer in the right corner, would love some suggestions on placement of the other skimmer...
The first light, is going where it's shown, now we need find a place for the second light.
Would love to hear feedback, suggestions, criticisms (not too many of those, unless really warranted )