- Jun 23, 2010
- 7
I have a Jandy RS6 controller and a Jandy Aqualink 6614/6615 Outside PCB Box. I have had numerous issues over the last 2 - 3 months.
Here is a summary:
1. Pool Pump would not turn off - I replaced the relay and this problem was solved.
2. Cleaner Pump would turn on intermittently, even when pool pump was off - I replaced the main PCB and cleaner pump relay.
The cleaner pump issue still exists. I disconnected the inside control panel and the cleaner pump started again. I have heard that a bad spa remote (4 button control pad mounted in spa) could send ghost signals to the pcb. I also heard that a dip switch on the pcb may not be recognized. Does anyone have any thoughts on either of these possible remedies? I am pretty frustrated at this point but I am determined to find the cause for this ongoing headache.
Thanks in advance.
Here is a summary:
1. Pool Pump would not turn off - I replaced the relay and this problem was solved.
2. Cleaner Pump would turn on intermittently, even when pool pump was off - I replaced the main PCB and cleaner pump relay.
The cleaner pump issue still exists. I disconnected the inside control panel and the cleaner pump started again. I have heard that a bad spa remote (4 button control pad mounted in spa) could send ghost signals to the pcb. I also heard that a dip switch on the pcb may not be recognized. Does anyone have any thoughts on either of these possible remedies? I am pretty frustrated at this point but I am determined to find the cause for this ongoing headache.
Thanks in advance.