Last night while swimming the Salt water Generator came on, without the pump running...my grandson had touched some of the buttons while outside ... I looked and it had a red light saying low salt, got out and turned everything off...then reset the pump and salt water generator to restart and run on the timer. The low salt light did not come on this time.
So this morning I tested the the clorine , first on the way to the barn with a test strip, it showed , chlorine down around 1.5 ppm, also ph was up a bit , so I came back, retested clorine and added ph down with pump running. The chlorine on the drop test showed 3-5 ppm. I did a Salt test strip and it showed 16-1700 ppm, when a couple weeks ago it showed 3300-4000 ppm 3X when tested.
So who do I believe? Cavet. We opened pool in July. We added the right amount of salt, a little bit extra actually. We have backwashed and drained some off after rains,half a dozen times. Also when we got new sandfilter we dropped water level below skimmer.....
So this morning I tested the the clorine , first on the way to the barn with a test strip, it showed , chlorine down around 1.5 ppm, also ph was up a bit , so I came back, retested clorine and added ph down with pump running. The chlorine on the drop test showed 3-5 ppm. I did a Salt test strip and it showed 16-1700 ppm, when a couple weeks ago it showed 3300-4000 ppm 3X when tested.
So who do I believe? Cavet. We opened pool in July. We added the right amount of salt, a little bit extra actually. We have backwashed and drained some off after rains,half a dozen times. Also when we got new sandfilter we dropped water level below skimmer.....