So we finally got our pool setup and are "SLAMing" for the first time. I have a TF-100 test kit and the first test of the FC level was 1.5. I just dumped enough Bleach into the pool to get the FC level up to 14 since our CYA was 35 (pool calculator said 3.5 of my 6% 96-oz jugs). According to the SLAM method, I am supposed to test the FC level every hour for a while and keep adding bleach each hour to maintain the FC level. I just tested the FC for the first time 1 hour after adding 3.5 bottles of bleach, and its 40! I'm assuming this is because the water hasnt had time to mix around? But I'm wondering why it says to test it every hour, b/c obviously thats not enough time to mix if the pool turns over every 8 hrs (thats about what I calculated with the pump I have). Any ideas? It takes a ton of the chlorine test liquid stuff to find out that the level is 40 (have to keep adding drops forever), so i dont want to waste it and run out before I even finish the SLAM process...