I opened the pool yesterday and right off the bat the filter gauge is only registering 2.
I have good pull in both skimmers and no problems with returns, they are moving the surface as usual.
So I was thinking the guage is bad and took the one of my neighbors, I get the exact same reading.
So I am thinking filters got fiflthy from opening cycle, but it was a 2 the instant I opened it. Anyway I spend an hour washing the filters, kick them back on and same 2.
My other thought is my water has not turned over, it is still cloudy with dirt on the bottom.
I am set to manuel vac tomorrow if I can see the bottom.
Maybe the bottom drains are clogged?
Water numbers are fine, hoping to turn over tonight, I held FC overnight and maintain 2ppm all day, ph is at 7.5, cya is 35.
Pool is a 55,000 gallon inground gunite.
Pentair CC Cartridge Filter
420 Sq Ft
Filters are 12 months old.
Any comments welcome
I have good pull in both skimmers and no problems with returns, they are moving the surface as usual.
So I was thinking the guage is bad and took the one of my neighbors, I get the exact same reading.
So I am thinking filters got fiflthy from opening cycle, but it was a 2 the instant I opened it. Anyway I spend an hour washing the filters, kick them back on and same 2.
My other thought is my water has not turned over, it is still cloudy with dirt on the bottom.
I am set to manuel vac tomorrow if I can see the bottom.
Maybe the bottom drains are clogged?
Water numbers are fine, hoping to turn over tonight, I held FC overnight and maintain 2ppm all day, ph is at 7.5, cya is 35.
Pool is a 55,000 gallon inground gunite.
Pentair CC Cartridge Filter
420 Sq Ft
Filters are 12 months old.
Any comments welcome