Hi everyone, I'm brand new to this forum, but have followed it for the last year. My problem is that I just got a new liner this season (Yes!) However the fire dept could only truck in about 7,000 gallons of my 18,000 gallon pool. The remainder came from my well water. I have a SWG and cannot remove the metals from the pool. I've been using Jacks Purple, Nat Chem Metal Free, Super Sequasol, and CUlator and they have not worked. Because I am nearly broke from purchasing so many products this year I tried one last item. Tonite I just used a spray floc (Revive). You are to turn off pump for 24 hrs and spray this on attached to garden hose. This is supposed to settle metals (and phosphates) to the bottom and vac to waste. Well after 3 hours, there is no change in the dark green pool water. It is a transparent green, especially dark in the deep end. I am at my wits end with this. I'll get the pool somewhat clearer and then as soon as I boost with the SWG it is green again. HELP What else can I do?
I have a SWG, 18,000 gallon in ground pool.
TA 120
Chlorine 6
PH 7.0 (Only because I just added muratic acid last nite and I have been aerating
I have a SWG, 18,000 gallon in ground pool.
TA 120
Chlorine 6
PH 7.0 (Only because I just added muratic acid last nite and I have been aerating