- Jun 9, 2008
- 3
Hello , I just started opening our 24 round ag late last week. We had a cover fall in this winter and picked up a bit of leaves and junk. We pole vac and ran our Roboclean to clean up the bottom to get started. The original tests were done with the hated test strips and showed 0 - fc 6.8 ph 20 - ta and 0 -cya.
We brushed and bleached and ran the filter and vac a few more times. Our newest tests are from an HTH 5 test kit after adding 4lbs arm and hammer and approx 4 156oz 6% bleach over 4 days.
FC-9 PH-7 TA-70 and CYA-30-40.
My pool is cloudy but clearing and the biggest question is , how important is the CYA level to be increased. Any help would be appreciated.
We brushed and bleached and ran the filter and vac a few more times. Our newest tests are from an HTH 5 test kit after adding 4lbs arm and hammer and approx 4 156oz 6% bleach over 4 days.
FC-9 PH-7 TA-70 and CYA-30-40.
My pool is cloudy but clearing and the biggest question is , how important is the CYA level to be increased. Any help would be appreciated.